Components

ZIEHL-ABEGG - GEARLESS TRACTION MACHINE SM250

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL- ABEGG - Gearless Traction Machine SM225

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL-ABEGG - GEARLESS TRACTION MACHINE SM210

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL-ABEGG - GEARLESS TRACTION MACHINE SM200

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL-ABEGG - GEARLESS TRACTION MACHINE SM180

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL-ABEGG - GEARLESS TRACTION MACHINE SM160

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL-ABEGG - Gearless Traction Machine SM132.35/B

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

ZIEHL-ABEGG - Gearless Traction Machine SM132.21/B

Properties & special features: / Permanent magnet excited gearless drive for traction sheave cable elevators. / Due to its compact design, the...

SICOR - Gearless Machine SG10 3.4KW - 4.4KW

Rated Torque – 165Nm (S3 40%) / Max Load in 2:1 – 800kg (120mm traction sheave) / Car speed – 0,63 … 1,6m/s / Power Range – 2,1 … 5...

SICOR - Gearless machine SG15 3.1KW - 6KW

Rated Torque – without fan 200Nm (S3 40%) / with fan 245Nm (S3 40%) / Max Load in 2:1 – 1275kg (120mm traction...

SICOR - GEARLESS MACHINE SG22 3.6KW - 6KW

Rated Torque – without fan 250Nm (S3 40%) / with fan 290Nm (S3 40%) / Max Load in 2:1 – 1600kg (puleggia da...

SICOR - GEARLESS MACHINE SG30 5KW - 8.2KW

Rated Torque – without fan 330Nm (S3 40%) / with fan 395Nm (S3 40%) / Max Load in 2:1 – 2000kg (120mm traction...

ITALY - FLAT CABLE - 12G 0.75

Travelling Flat Cable with 12 conductors. Section 0,75 mm2.

ITALY - FLAT CABLE - 24G 0.75

Travelling Flat Cable with 20 conductors. Section 0,75 mm2.

SPAIN - FLAT CABLE - 24 x 0,75 +1,5 G/V + 1X2X0,5 Twist (Compositi)

Travelling Flat Cable with 24 conductors. Section 0,75 mm2.

SPAIN - FLAT CABLE - 12G 0.75

Travelling Flat Cable with 12 conductors. Section 0,75 mm2.

SPAIN - FLAT CABLE - 24G 0.75

Travelling Flat Cable with 24 conductors. Section 1,00 mm2.

DRAKO - WIRE ROPE - 250TPC

8-strand steel core rope / Blue DRAKO-Marking-Line for an easy installation / Very rounded rope cross-section / Very high flexural...

DRAKO - WIRE ROPE - 300TP

9-strand double-parallel steel core rope / Very round cross-section / High flexural performance / Unrivalled large metallic filling...

DRAKO - WIRE ROPE - 8X19S NFC

Rounder than 6-strand ropes, i.e. more contact points rope to groove / Deformable in cross-section, i.e. the new rope adapts a little bit to...

DRAKO - WIRE ROPE - 250H

8-strand steel core rope / flexible, with good fatigue bending properties / low rope diameter reduction in loaded condition, also after long...

DRAKO - WIRE ROPE - 300T

The strand construction of DRAKO 300T is dependent on the rope diameter to optimize fatigue bending performance and wear resistance. / very round...

ITALY - WIRE ROPE - Dimension 8 152 wires (8x19) R

Ø 8 152 wires (8x19) R

ITALY - WIRE ROPE - Dimension 10 152 wires (8x19) R

Ø 10 152 wires (8x19) R

ITALY - WIRE ROPE - dimension 12 152 wires (8x19) R

Ø 12 152 wires (8x19) R

TURKEY - WIRE ROPE - Dimension 8 152 wires (8x19) R

Ø 8 152 wires (8x19) R

TURKEY - WIRE ROPE - Dimension 10 152 wires (8x19) R

Ø 10 152 wires (8x19) R

TURKEY - WIRE ROPE - dimension 12 152 wires (8x19) R

Ø 12 152 wires (8x19) R

DRAKO - WIRE ROPE - 250T

8-strand steel core rope Very low D/d ratio of up to 8 mm in diameter Required drive torque is greatly reduced Cost saving drives...

40/10 PM - Automatic horizontal sliding car door

PRISMA - SERIE MICRO 75 - CAR DOOR DEVICE 700mm

The MICRO 75 Series cabin door is produced in a two-door telescopic and four-door central version. It is useful for use in compartments where the...

PRISMA - SERIES Q 75 STANDARD SERIES - LANDING DOOR DEVICE

The Q75 Series landing door is produced in a two-door telescopic and four-door central version. It is useful for use in compartments where the...

PRISMA - SERIE MICRO STANDARD - CAR DOOR DEVICE

The Serie MICRO is equipped with a tried and tested compact electronic direct-belt operator controlled by the FOX Drive, with standard power supply...

PRISMA - SERIE Q STANDARD - LANDING DOOR DEVICE

Thanks to its broad product range and features the Serie Q landing doors can be used in a wide array of different installations. It's cutting edge...

HANDLES - HANDRAILS

The colors in this catalog adhere to reality with the possibilities offered by the printing technique. / Colors shown in this catalog are faithful,...

SUSPENDED CEILINGS - HOMELIFT

Available also with RAL painting with orange peel finish. / For colour chart, please contact our sales departmen. / Colours shown in this...

STAINLESS STEEL - HOMELIFT

Available also with RAL painting with orange peel finish. / For colour chart, please contact our sales departmen. / Colours shown in this...

FLOOR - HOMELIFT

Available also with RAL painting with orange peel finish. / For colour chart, please contact our sales departmen. / Colours shown in this...

SKINPLATE - HOMELIFT

Available also with RAL painting with orange peel finish. / For colour chart, please contact our sales departmen. / Colours shown in this...

PLANTS

MONTERFFERO - ITALY GUIDE RAIL - T50

MONTERFFERO - ITALY GUIDE RAIL - T70

MONTERFFERO - ITALY GUIDE RAIL - T89

MONTERFFERO - ITALY GUIDE RAIL - T90

PFB - Overspeed Governor R1

Approved by TÜV Germany according to Directive 95/16/CE and standards EN81-1/2 and directive EN81-20/50. Available with protection cover and rope...

PFB - Overspeed Governor - R3

PHOTOCELL - SERIE CL

Multi-beam optical barriers to protect elevator doors and lifting platforms / Extreme simplicity of installation on new or existing systems...

DMG - LOP/COP - MURANO TOUCH

MURANO TOUCH - When Design meets the elegance of Glass... / MURANO TOUCH is the new line of tempered glass panels featuring DMG’s innovative...

DMG - LOP/COP - CUT

The new top range fixture line from DMG. / Surface mounted panels with shaped screen insert. / Flat polished stainless steel top/bottom endings...

DMG - LOP/COP - LUNA

Behind trade agreement with DMG / The new and exclusive panels shape, the easiest mounting system, super affordable prices and quickest delivery...

DMG - LOP/COP - ELISE

A brand new shape with an elegant rounded profile, available on the whole range of flat plates, whatever the materials or the finishings...

DMG - LOP/COP - GILDA SILVERLIGHT

New line of surface mounted car and hall panels / The range of Gilda plates is now enriched with new car and hall surface mounted panels,...

DMG - PUSH BUTTON - BN Dune

Pushbuttons and Indicators - BN Dune / Zama alloy frontal mounting vandal-resistant pushbutton with illuminated halo / Zama alloy, opaque...

DMG - PUSH BUTTON - BR DARDO

- Lettering, also available in TFT display graphics, specifically designed to fit the button’s aesthetics. / - Frontal mounting with metal collar...

DMG - PUSH BUTTON - BL

New BL ... the most effective response to the standards EN 81-70 ! / Available with single illumination (symbol and halo lighted upon activation)...

DMG - PUSH BUTTON - BM

DMG introduces its pushbutton featuring both EN81-70 raised symbol and Braille tactile / The frontal mounted BM Macro has bigger size, with...

DMG - PUSH BUTTON - B7 MAXXI

The new B7 MAXXI push-button is the answer to all those applications where push-button should be easily identified: EN 81-70 compliant extra large...

DMG - PUSH BUTTON - BP PANZER

A by-word for vandal-resistance for years, Panzer pushbutton is compliant to EN 81-71 norm (CLASS 2) / Vandal-resistant pushbutton in AISI 303...